I-7532
I-7532

The I-7532 is a CAN bus bridge that can be used to integrate two CAN networks even they implement different CAN baud rate. Compared with the I-7531, the I-7532 offers more than 3 useful features. First, the transmission distance limitation of the CAN bus system on each side of the I-7532 is independent, which means the total CAN network distance can be extended. Second, when some errors (e.g. bit error) happened on one CAN port of the I-7532, the other CAN port of the I-7532 will not be affected and can still work correctly. Last, the baud rate and CAN message filter configuration of these two CAN ports on the I-7532 is able to be tuned following users’ applications. These features mean that users can design their applications more flexible and efficient.

 

 

Request For Quotation


    Category:

    Description

     

    Applications

    • Control System
    • Building Automation
    • Factory Automation
    • Distributed data acquisition

     

    Features

    • 82C250 CAN transceiver
    • 2500 VRMS photo coupler isolation on the CAN side
    • 3KV galvanic isolation among the power supply and 2 CAN channels
    • Support both CAN 2.0A and CAN 2.0B
    • Fully compatible with the ISO 11898-2 standard
    • Adjustable CAN bus baud rate from 5Kbps to 1Mbps or programmable user-defined baud rate
      (For firmware v1.01 or newer) (NEW)
    • Support CAN bus message acceptance filter configuration
      (For firmware v1.01 or newer) (NEW)
    • Provide I-7532 Utility for CAN bus message acceptance filter and user-defined CAN baud rate etc. configuration easily and quickly
      (For firmware v1.01 or newer) (NEW)
    • Support firmware update via CAN1 of I-7532
      (For firmware v1.02 or newer) (NEW)
    • CAN messages can be forwarded under another identifier
      (For firmware v1.03 or newer) (NEW)
    • Built-in jumper to select 120Ω terminal resistor
    • Watchdog inside
    • Up to 100 CAN nodes on each channel
    • Transmission distance up to 1 km on each CAN port
    • Removable terminal block, Mount easily on DIN-rail
    • 768 frame buffer for each CAN channel
    • The baud of each channel can be different for highly flexibility
    • Supports a range of baud rates from 10 kbps ~ 1 Mbps
    • Able to configure the CAN baud rate for each channel using a rotary switch
    • Extends the CAN transmission distance
      Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of I-7532.
    Baud Rate Selection by Rotary Switch
    Switch Value
    0
    1
    2
    3
    Baud [bps]
    Config
    Mode
    5k or User-defined
    CAN baud
    10k
    20k
    Switch Value
    4
    5
    6
    7
    Baud [bps]
    40k
    50k
    80k
    100k
    Switch Value
    8
    9
    A
    B
    Baud [bps]
    125k
    200k
    250k
    400k
    Switch Value
    C
    D
    E
    F
    Baud [bps]
    500k
    600k
    800k
    1000k

    Utlity

    • Provide CAN bus User-Defined Baud Rate / CAN-ID Acceptance Filter / CAN-ID Mapping configuration
    • Provide saving the CAN acceptance filter data to file. The “*.dat” file format is compatible with configuration file of I-7565-H1/H2. The “*.xls” file is useful for CAN hardware interface of other companies to configure CAN-ID filter function of I-7532
    • Support ICP DAS CAN hardware interface including “RS232 to CAN”, “Ethernet to CAN”, “USB to CAN”, “CAN Card” series products for configuration

    Hardware Specifications

    CAN Interface
    Transceiver
    NXP 82C250
    Channel number
    2
    Connector
    4-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H)
    Baud Rate (bps)
    Adjustable CAN bus baud rate from 5Kbps to 1Mbps or programmable user-defined baud rate
    Isolation
    3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
    Terminal Resistor
    Jumper for 120 Ω terminal resistor
    Specification
    ISO-11898-2, CAN 2.0A and CAN 2.0B
    Time Delay
    		 [ 1Mbps (8-byte Data) ] ID-29bit => 156us ; ID-11bit => 134us
    [ 5Kbps (8-byte Data) ] ID-29bit => 30ms ; ID-11bit => 25ms
    Power
    Power supply
    Unregulated +10 ~ +30 VDC
    Protection
    Power reverse polarity protection, Over-voltage brown-out protection
    Power Consumption
    2 W
    Mechanism
    Installation
    DIN-Rail
    Dimensions
    72mm x 122mm x 33mm (W x L x H)
    Environment
    Operating Temp.
    -25 ~ 75 ℃
    Storage Temp.
    -30 ~ 80 ℃
    Humidity
    10 ~ 90% RH, non-condensing

    Hardware Structure

    Wire Connection

    Pin Assignment

     

    Internal I/O Structure

    Ordering Informations

    I-7532-G CR Two-channel CAN Bus Isolated Bridge (RoHS)

    Datasheet

    I-7532

    I-7532_UserManual_eng_v1.6

     

    Related products