ICP DAS has provided various USB to CAN product solutions which are widely recommended in the market. The USB to CAN converters can help users to implement the communication with CAN network via USB interface. In order to cater for costing requirement, we provide a new solution of USB to CAN converter-tM-7565. The tM-7565 is a tiny USB to CAN converter to fit for narrower environment as a result of its small size. Since it has USB interface, it is easily to be used via laptop. It has isolation on power side and on CAN bus side and it has a good performance. The function of tM-7565 can full compatibly with I-7565. In additional, it provides new function such as listen only. User can use this function to listen CAN bus messages and error detection. According to above features, tM-7565 is an economical and practical USB to CAN converter solution.



Request For Quotation



    Moreover, we expand the functionalities of tM-7565 for some special application. In pair connection mode, tM-7565 can be used to communicate between two PC via USB. The application architecture may be as follows.


    • Control System
    • Building Automation
    • Factory Automation
    • Distributed data acquisition





    Product Features

    • Compatible with CAN specification 2.0A and 2.0B
    • Fully compatible with ISO 11898-2 standard
    • Support various CAN baud rate from 10K bps to 1M bps
    • Support user-defined CAN baud rate
    • Support various USB baud rate from 110 bps to 230400 bps
    • Build-in selectable 120 Ω terminal resistor
    • Software configurable CAN and USB communication parameters
    • Power, data flow, and error indicator for CAN and USB
    • Watchdog inside
    • Support pair connection mode
    • Software buffer on CAN bus side and USB side
    • Support user-defined end of characters on pair connection mode
    • Support listen only mode ·  Support time stamp response on USB side

    Software Features

    • CAN bus baud rate configuration
    • CAN bus ID filter configuration
    • CAN 2.0A or CAN 2.0B specification selection
    • USB baud rate and data format configuration
    • Communication mode(normal , pair connection , and listen only mode ) configuration
    • Easy test to transmit/receive CAN messages
    • CAN bus data flow detection
    • Group Send CAN messages for special application
    • Trigger event setting for advance received CAN messages
    • Integrate all CAN bus converter utility of ICP DAS



    The tM-7565 uses VxCAN Utility to configure and test. VxCAN is a technique developed from ICP DAS and we call it “Virtual CAN”. It is used to integrate all of ICP DAS CAN converter modules. Via this technique and its Windows platform API, users can develop utility tool by themselves to fit their application. The VxCAN Utility is also developed by using this method. Thus, we will integrate all CAN converter utility via VxCAN Utility in the future. About more VxCAN information


    Hardware Specifications

    CAN Interface
    Transceiver NXP TJA1042
    Channel number 1
    Connector 7-pins screwed terminal block(CAN_H, CAN_L, CAN_GND)
    Baud Rate (bps) 10 k, 20 k, 50 k, 100k, 125 k, 250 k, 500 k, 800 k, 1 Mbps
    Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
    Terminal Resistor Build-in selectable 120 Ω terminal resistor
    Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
    USB Interface
    COM Virtual COM
    Connector USB Type B connector
    Baud Rate (bps) 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
    Data bit 5, 6, 7, 8
    Stop bit 1, 2
    Parity bit None, Even, Odd
    Round LED ON LED: Power and Data Flow; ERR LED: Error Status
    Power Consumption 1W
    Installation DIN-Rail
    Dimensions 52mm x 87mm x 27mm (W x L x H)
    Operating Temp. -25 ~ 75 ℃
    Storage Temp. -30 ~ 80 ℃
    Humidity 10 ~ 90% RH, non-condensing

    Hardware Structure

    Wire Connection

    The tM-7565 is USB to one CAN port converter. Thus, the other CAN port is bypass port which is used for wiring easily.

    Pin Assignment


    Performance Test

    Performance test: from USB (115200, n, 8, 1).  Unit: Frames Per Second (FPS).
    Baud rate 1000K 800K 500K 250K 125K 50K 20K 10K
    CAN 2.0A 519 519 523 522 522 416 176 88
    CAN 2.0B 423 423 426 425 426 353 146 74


    Performance test: from USB (115200, n, 8, 1) to CAN.  Unit: Frames Per Second (FPS).
    Baud rate 1000K 800K 500K 250K 125K 50K 20K 10K
    CAN 2.0A 523 524 523 522 520 451 180 90
    CAN 2.0B 425 426 427 426 427 377 150 75

    Ordering Informations

    tM-7565 CR
    Intelligent tiny USB to CAN converter (RoHS)
    1.8M USB type A to type B cable