I-2534 & I-5534-M

I-2534 & I-5534-M

The I-2534 / I-5534-M is one kind of CAN bus switch. There are four independent CAN channels which offer a flexible design of the start or tree network topology. This new topology could resolve the complex CAN bus application, like industrial machinery, building automation, vehicle automation, and etc. Furthermore the I-2534 / I-5534-M integrates and exchanges data between different CAN network which has different baud rate. It helps users to extend the CAN network system. The I-2534 / I-5534-M could increase the maximum CAN node count in a CAN network by splitting the CAN network into several subnets. In additional, the user-defined CAN baud rate and CAN filter configuration are also supported.

Request For Quotation

Category: IoT /AI accessories & peripherals

Description

Applications

Control System
Building Automation
Factory Automation
Distributed data acquisition

Features

4 CAN communication ports
Compatible with CAN specification 2.0A and 2.0B
Fully compatible with the ISO 11898-2 standard
Baud rate : 5 k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
CAN bus filter is configurable
100 data frames buffer for each CAN channel
Max data flow up to 2500 fps for all CAN channel
Selectable baud rate by rotary switch
Selectable 120Ω terminal resistor by DIP switch
LED for CAN reception and transmission
Support CAN network with star or tree topology
Extending the CAN bus distance to expand the CAN network size
Integrating different CAN network with different baud rate
I-2534 is casing with Flame-Resistant plastic case
I-5534-M is casing with Aluminum metallic case
Utility tool for CAN filter, route path, user-defined baud rate and CAN-ID mapping (v1.10 firmware) configuration
Max. CAN-ID mapping data up to 32 for each CAN channel. (v1.10 firmware)

Hardware Specifications

Model Name	I-2534	I-5534-M
Hardware
Controller	High Performance Microcontroller
RTC (Real Time Clock)	No
Watchdog	Watchdog IC
CAN Interface
Transceiver	NXP TJA1042
Channel number	4
CAN Connector	3-pin screwed terminal block with CAN_H, CAN_L, CAN_GND	9-pin male D-Sub with CAN_GND, CAN_SHLD, CAN_H, CAN_L
CAN Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B
Baud Rate (bps)	5k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
Baud Rate Selection	Selectable by rotary switch
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor	Selectable 120Ω terminal resistor by DIP switch	Selectable 120Ω terminal resistor by internal jump
Transmission Distance (m)	Depend on baud rate (for example, max. 1000 m at 50 kbps )
CAN Filter	Configurable by user
Propagation Delay	240 us ~ 1360 us ^*note1
UART Interface
RS-232	1 port (for configuration)
RS-232 Connector	3-pin screwed terminal block (TxD, RxD, GND )	9-pin screwed terminal block (TxD, RxD, GND )
LED
Round LED	CAN status LED x 4 , Power LED x 1
Power
Input range	Unregulated +10 ~ +30 VDC
Power Consumption	3W	1.5W
Mechanism
Installation	DIN-Rail	Wall-Mounting
Casing	Flame-Resistant plastic case	Aluminum metallic case
Dimensions	32.3 mm x 99 mm x 77.5 mm (W x L x H)	116.5 x 127 x 61.3 mm (W x L x H)
Environment
Operating Temp.	-25 ~ 75 ℃
Storage Temp.	-30 ~ 80 ℃
Humidity	10 ~ 90% RH, non-condensing
ESD protection	4 kV Contact for each channel
EFT protection	500V for signal, 1000V for power
EMI certification	30M ~ 1G pass
Hi-pot protection	1kV pass
Surge protection	500V pass	1kV pass

note1:
The propagation delay depends on the CAN Bus baud rate and the CAN message format.
The minimum delay is [ 11-bit ID and 8-byte data @ 1M bps ]
The maximum delay is [ 29-bit ID and 8-byte data @ 5k bps ]