– Provides low cost, low power, 10GbE performance for the entire datacenter.
– Solves the high requirements of the generation data center, it has dual 10Gbps RJ45 port which can setup a long-distance link with a fileserver or a remote workstation.
– Supports standard CAT6 and CAT6A cabling – standard cabling for many data centers.
– Supports NBASE-T* technology (2.5 and 5.0 GbE over CAT 5e)1.
– Swappable between 1GbE, 2.5GbE, 5GbE, and 10GbE provides the necessary backwards compatibility.
Description
Features :
Specification
PCI-Express host interface specification v3.0
Complies with PCI Bus Power Management Interface Specification Rev1.2
PCI-Express lanes: x4
Supports dual 10GbE RJ45 port
Operate Speeds: 10Gb/s, 5Gb/s, 2.5Gb/s, 1Gb/s, 100Mb/s
10GBASE-T as per the IEEE 802.3an standard
1000BASE-T and 100BASE-TX as per the IEEE Standard 802.3-2012
NBASE-T as per the IEEE P802.3bz/D1.1 Draft Standard for Ethernet Amendment
Half duplex at 10/100Mbp operation and full duplex operation at all supported speeds
Layer 2 functions: IEEE 802.3x Flow Control – IEEE 802.1q VLAN
Supports Receive-side scaling (RSS)
Supports IPv 4, IPv 6 protocols
Supports Jumbo Frames up to 15.5K
Supports UDP, TCP and IP Checksum offloading
128 transmit queues
Statistics for management and RMON
Support for 64 virtual machines per port (64VMs x2 queues)
Support for Data Center Bridging (DCB) (802.1Qaz, 802.1Qbb, 802.1p)
Interrupt throttling control to limit maximum interrupt rate and improve CPU usage
Chipset: Intel ELX550-AT2
Drivers support for FreeBSD, Linux, VMWare ESXi, Win7 / Win-Server 2012 /Win-Server 2008 / Win8 / Win8.1 / Win-Server 2016 / Win10 / Win-Server2019 / Win11 / Win-Server 2022
